Carbon Sulfur Analyzer

High automation Real time monitor control Friendly operational software User management and data base management

♦ Application     

5E-CS400 employs high-frequency induced combustion to determine total carbon and total sulfur content in steel, iron, alloy, nonferrous metal, cement, mineral, soil, ceramics, glass and other materials.

♦  Specififcation                                                                                                 

Analysis method	Infrared spectroscopy
Resolution	0.1ppm
Analysis range	C: 0.0001%~8% (expansible) S: 0.0001%~3% (expansible)
Repeatability	C: RSD ≤0.5% S: RSD ≤1.5%
Analysis time	20 s~50 s, representative value: 30 s
High frequency furnace	18 MHz, 2.5 kW
Sample mass	Iron:0.2000g Steel:0.4000g
Ambient condition	Room temperature 5°C~35°C; relative humidity ≤85%, no corrosive gas and violent vibration.
Power supply	AC220V, 50Hz, 5000W.
Oxygen gas	O2: purity ≥99.5%, pressure 0.30 Mpa, Oxygen-carrying pressure of furnace end 0.08Mpa.
Power Gas	Nitrogen or compressed air (purified); pressure imported 0.30 Mpa.
Analysis gas flow	3.5L/min.
Dimension	600 mm (length)× 700 mm (width) × 860 mm (height)

♦ Features                                                                                                                  

Discharge ash automatically using back flushing technique, it is not necessary to clean furnace end manually after thousands of analysis.Detect gas circuit by sector which is convenient to check the position leaking.Bi-carbon cell structure; wider measuring range, better linearity; select appropriate cell automatically when analyzing.Original wide-range single sample calibrating with calibrating factors: Widen calibrating curve using range and reduce calibrating frequency.Original comparison level automatic selection; wider analysis range, samples with high content or low content can be analyzed by same method.Start the analysis by “Start analysis” button without mouse or keyboard, operation is more convenient.Power:0~100% (adjustable), which is applicable to different sample.Remove adsorptions, no "saturation" of gas circuit after powering on; Both interval measuring (bath analysis) and continuous measuring (product analysis) are stable.Brevity software interface and easy operation; Statistical data (average value, range, deviation and RSD) will be out if sample is selected; Display thickness curve at real time, inquire at any time. Connect to balance without manual input.Connect with electric balance; input sample mass automatically without keyboard and mouse.

Carbon Sulfur Analyzer